Skip to content

O
OS_XV6
Commit a4c94803 authored by Amir Hosein Kashani's avatar Amir Hosein Kashani
Browse files
Options

initial state

parents
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3592 additions and 0 deletions
.cvsignore 0 → 100644
View file @ a4c94803
*.asm
*.d
*.sym
_*
kernel
user1
userfs
usertests
xv6.img
vectors.S
bochsout.txt
bootblock
bootother
bootother.out
parport.out
fmt
.dir-locals.el 0 → 100644
View file @ a4c94803
((c-mode
(indent-tabs-mode . nil)
(c-file-style . "bsd")
(c-basic-offset . 2)))
.gdbinit.tmpl 0 → 100644
View file @ a4c94803
set $lastcs = -1
define hook-stop
# There doesn't seem to be a good way to detect if we're in 16- or
# 32-bit mode, but in 32-bit mode we always run with CS == 8 in the
# kernel and CS == 35 in user space
if $cs == 8 || $cs == 35
if $lastcs != 8 && $lastcs != 35
set architecture i386
end
x/i $pc
else
if $lastcs == -1 || $lastcs == 8 || $lastcs == 35
set architecture i8086
end
# Translate the segment:offset into a physical address
printf "[%4x:%4x] ", $cs, $eip
x/i $cs*16+$eip
end
set $lastcs = $cs
end
echo + target remote localhost:1234\n
target remote localhost:1234
echo + symbol-file kernel\n
symbol-file kernel
.gitignore 0 → 100644
View file @ a4c94803
*~
_*
*.o
*.d
*.asm
*.sym
*.img
vectors.S
bootblock
entryother
initcode
initcode.out
kernel
kernelmemfs
mkfs
.gdbinit
BUGS 0 → 100644
View file @ a4c94803
formatting:
need to fix PAGEBREAK mechanism
sh:
can't always runcmd in child -- breaks cd.
maybe should hard-code PATH=/ ?
LICENSE 0 → 100644
View file @ a4c94803
The xv6 software is:
Copyright (c) 2006-2018 Frans Kaashoek, Robert Morris, Russ Cox,
Massachusetts Institute of Technology
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Makefile 0 → 100644
View file @ a4c94803
OBJS = \
bio.o\
console.o\
exec.o\
file.o\
fs.o\
ide.o\
ioapic.o\
kalloc.o\
kbd.o\
lapic.o\
log.o\
main.o\
mp.o\
picirq.o\
pipe.o\
proc.o\
sleeplock.o\
spinlock.o\
string.o\
swtch.o\
syscall.o\
sysfile.o\
sysproc.o\
trapasm.o\
trap.o\
uart.o\
vectors.o\
vm.o\
# Cross-compiling (e.g., on Mac OS X)
# TOOLPREFIX = i386-jos-elf
# Using native tools (e.g., on X86 Linux)
#TOOLPREFIX =
# Try to infer the correct TOOLPREFIX if not set
ifndef TOOLPREFIX
TOOLPREFIX := $(shell if i386-jos-elf-objdump -i 2>&1 | grep '^elf32-i386$$' >/dev/null 2>&1; \
then echo 'i386-jos-elf-'; \
elif objdump -i 2>&1 | grep 'elf32-i386' >/dev/null 2>&1; \
then echo ''; \
else echo "***" 1>&2; \
echo "*** Error: Couldn't find an i386-*-elf version of GCC/binutils." 1>&2; \
echo "*** Is the directory with i386-jos-elf-gcc in your PATH?" 1>&2; \
echo "*** If your i386-*-elf toolchain is installed with a command" 1>&2; \
echo "*** prefix other than 'i386-jos-elf-', set your TOOLPREFIX" 1>&2; \
echo "*** environment variable to that prefix and run 'make' again." 1>&2; \
echo "*** To turn off this error, run 'gmake TOOLPREFIX= ...'." 1>&2; \
echo "***" 1>&2; exit 1; fi)
endif
# If the makefile can't find QEMU, specify its path here
# QEMU = qemu-system-i386
# Try to infer the correct QEMU
ifndef QEMU
QEMU = $(shell if which qemu > /dev/null; \
then echo qemu; exit; \
elif which qemu-system-i386 > /dev/null; \
then echo qemu-system-i386; exit; \
elif which qemu-system-x86_64 > /dev/null; \
then echo qemu-system-x86_64; exit; \
else \
qemu=/Applications/Q.app/Contents/MacOS/i386-softmmu.app/Contents/MacOS/i386-softmmu; \
if test -x $$qemu; then echo $$qemu; exit; fi; fi; \
echo "***" 1>&2; \
echo "*** Error: Couldn't find a working QEMU executable." 1>&2; \
echo "*** Is the directory containing the qemu binary in your PATH" 1>&2; \
echo "*** or have you tried setting the QEMU variable in Makefile?" 1>&2; \
echo "***" 1>&2; exit 1)
endif
CC = $(TOOLPREFIX)gcc
AS = $(TOOLPREFIX)gas
LD = $(TOOLPREFIX)ld
OBJCOPY = $(TOOLPREFIX)objcopy
OBJDUMP = $(TOOLPREFIX)objdump
CFLAGS = -fno-pic -static -fno-builtin -fno-strict-aliasing -O2 -Wall -MD -ggdb -m32 -Werror -fno-omit-frame-pointer
CFLAGS += $(shell $(CC) -fno-stack-protector -E -x c /dev/null >/dev/null 2>&1 && echo -fno-stack-protector)
ASFLAGS = -m32 -gdwarf-2 -Wa,-divide
# FreeBSD ld wants ``elf_i386_fbsd''
LDFLAGS += -m $(shell $(LD) -V | grep elf_i386 2>/dev/null | head -n 1)
# Disable PIE when possible (for Ubuntu 16.10 toolchain)
ifneq ($(shell $(CC) -dumpspecs 2>/dev/null | grep -e '[^f]no-pie'),)
CFLAGS += -fno-pie -no-pie
endif
ifneq ($(shell $(CC) -dumpspecs 2>/dev/null | grep -e '[^f]nopie'),)
CFLAGS += -fno-pie -nopie
endif
xv6.img: bootblock kernel
dd if=/dev/zero of=xv6.img count=10000
dd if=bootblock of=xv6.img conv=notrunc
dd if=kernel of=xv6.img seek=1 conv=notrunc
xv6memfs.img: bootblock kernelmemfs
dd if=/dev/zero of=xv6memfs.img count=10000
dd if=bootblock of=xv6memfs.img conv=notrunc
dd if=kernelmemfs of=xv6memfs.img seek=1 conv=notrunc
bootblock: bootasm.S bootmain.c
$(CC) $(CFLAGS) -fno-pic -O -nostdinc -I. -c bootmain.c
$(CC) $(CFLAGS) -fno-pic -nostdinc -I. -c bootasm.S
$(LD) $(LDFLAGS) -N -e start -Ttext 0x7C00 -o bootblock.o bootasm.o bootmain.o
$(OBJDUMP) -S bootblock.o > bootblock.asm
$(OBJCOPY) -S -O binary -j .text bootblock.o bootblock
./sign.pl bootblock
entryother: entryother.S
$(CC) $(CFLAGS) -fno-pic -nostdinc -I. -c entryother.S
$(LD) $(LDFLAGS) -N -e start -Ttext 0x7000 -o bootblockother.o entryother.o
$(OBJCOPY) -S -O binary -j .text bootblockother.o entryother
$(OBJDUMP) -S bootblockother.o > entryother.asm
initcode: initcode.S
$(CC) $(CFLAGS) -nostdinc -I. -c initcode.S
$(LD) $(LDFLAGS) -N -e start -Ttext 0 -o initcode.out initcode.o
$(OBJCOPY) -S -O binary initcode.out initcode
$(OBJDUMP) -S initcode.o > initcode.asm
kernel: $(OBJS) entry.o entryother initcode kernel.ld
$(LD) $(LDFLAGS) -T kernel.ld -o kernel entry.o $(OBJS) -b binary initcode entryother
$(OBJDUMP) -S kernel > kernel.asm
$(OBJDUMP) -t kernel | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernel.sym
# kernelmemfs is a copy of kernel that maintains the
# disk image in memory instead of writing to a disk.
# This is not so useful for testing persistent storage or
# exploring disk buffering implementations, but it is
# great for testing the kernel on real hardware without
# needing a scratch disk.
MEMFSOBJS = $(filter-out ide.o,$(OBJS)) memide.o
kernelmemfs: $(MEMFSOBJS) entry.o entryother initcode kernel.ld fs.img
$(LD) $(LDFLAGS) -T kernel.ld -o kernelmemfs entry.o $(MEMFSOBJS) -b binary initcode entryother fs.img
$(OBJDUMP) -S kernelmemfs > kernelmemfs.asm
$(OBJDUMP) -t kernelmemfs | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernelmemfs.sym
tags: $(OBJS) entryother.S _init
etags *.S *.c
vectors.S: vectors.pl
./vectors.pl > vectors.S
ULIB = ulib.o usys.o printf.o umalloc.o
_%: %.o $(ULIB)
$(LD) $(LDFLAGS) -N -e main -Ttext 0 -o $@ $^
$(OBJDUMP) -S $@ > $*.asm
$(OBJDUMP) -t $@ | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > $*.sym
_forktest: forktest.o $(ULIB)
# forktest has less library code linked in - needs to be small
# in order to be able to max out the proc table.
$(LD) $(LDFLAGS) -N -e main -Ttext 0 -o _forktest forktest.o ulib.o usys.o
$(OBJDUMP) -S _forktest > forktest.asm
mkfs: mkfs.c fs.h
gcc -Werror -Wall -o mkfs mkfs.c
# Prevent deletion of intermediate files, e.g. cat.o, after first build, so
# that disk image changes after first build are persistent until clean. More
# details:
# http://www.gnu.org/software/make/manual/html_node/Chained-Rules.html
.PRECIOUS: %.o
UPROGS=\
_cat\
_echo\
_forktest\
_grep\
_init\
_kill\
_ln\
_ls\
_mkdir\
_rm\
_sh\
_stressfs\
_usertests\
_wc\
_zombie\
fs.img: mkfs README $(UPROGS)
./mkfs fs.img README $(UPROGS)
-include *.d
clean:
rm -f *.tex *.dvi *.idx *.aux *.log *.ind *.ilg \
*.o *.d *.asm *.sym vectors.S bootblock entryother \
initcode initcode.out kernel xv6.img fs.img kernelmemfs \
xv6memfs.img mkfs .gdbinit \
$(UPROGS)
# make a printout
FILES = $(shell grep -v '^\#' runoff.list)
PRINT = runoff.list runoff.spec README toc.hdr toc.ftr $(FILES)
xv6.pdf: $(PRINT)
./runoff
ls -l xv6.pdf
print: xv6.pdf
# run in emulators
bochs : fs.img xv6.img
if [ ! -e .bochsrc ]; then ln -s dot-bochsrc .bochsrc; fi
bochs -q
# try to generate a unique GDB port
GDBPORT = $(shell expr `id -u` % 5000 + 25000)
# QEMU's gdb stub command line changed in 0.11
QEMUGDB = $(shell if $(QEMU) -help | grep -q '^-gdb'; \
then echo "-gdb tcp::$(GDBPORT)"; \
else echo "-s -p $(GDBPORT)"; fi)
ifndef CPUS
CPUS := 2
endif
QEMUOPTS = -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp $(CPUS) -m 512 $(QEMUEXTRA)
qemu: fs.img xv6.img
$(QEMU) -serial mon:stdio $(QEMUOPTS)
qemu-memfs: xv6memfs.img
$(QEMU) -drive file=xv6memfs.img,index=0,media=disk,format=raw -smp $(CPUS) -m 256
qemu-nox: fs.img xv6.img
$(QEMU) -nographic $(QEMUOPTS)
.gdbinit: .gdbinit.tmpl
sed "s/localhost:1234/localhost:$(GDBPORT)/" < $^ > $@
qemu-gdb: fs.img xv6.img .gdbinit
@echo "*** Now run 'gdb'." 1>&2
$(QEMU) -serial mon:stdio $(QEMUOPTS) -S $(QEMUGDB)
qemu-nox-gdb: fs.img xv6.img .gdbinit
@echo "*** Now run 'gdb'." 1>&2
$(QEMU) -nographic $(QEMUOPTS) -S $(QEMUGDB)
# CUT HERE
# prepare dist for students
# after running make dist, probably want to
# rename it to rev0 or rev1 or so on and then
# check in that version.
EXTRA=\
mkfs.c ulib.c user.h cat.c echo.c forktest.c grep.c kill.c\
ln.c ls.c mkdir.c rm.c stressfs.c usertests.c wc.c zombie.c\
printf.c umalloc.c\
README dot-bochsrc *.pl toc.* runoff runoff1 runoff.list\
.gdbinit.tmpl gdbutil\
dist:
rm -rf dist
mkdir dist
for i in $(FILES); \
do \
grep -v PAGEBREAK $$i >dist/$$i; \
done
sed '/CUT HERE/,$$d' Makefile >dist/Makefile
echo >dist/runoff.spec
cp $(EXTRA) dist
dist-test:
rm -rf dist
make dist
rm -rf dist-test
mkdir dist-test
cp dist/* dist-test
cd dist-test; $(MAKE) print
cd dist-test; $(MAKE) bochs || true
cd dist-test; $(MAKE) qemu
# update this rule (change rev#) when it is time to
# make a new revision.
tar:
rm -rf /tmp/xv6
mkdir -p /tmp/xv6
cp dist/* dist/.gdbinit.tmpl /tmp/xv6
(cd /tmp; tar cf - xv6) | gzip >xv6-rev10.tar.gz # the next one will be 10 (9/17)
.PHONY: dist-test dist
Notes 0 → 100644
View file @ a4c94803
bochs 2.2.6:
./configure --enable-smp --enable-disasm --enable-debugger --enable-all-optimizations --enable-4meg-pages --enable-global-pages --enable-pae --disable-reset-on-triple-fault
bochs CVS after 2.2.6:
./configure --enable-smp --enable-disasm --enable-debugger --enable-all-optimizations --enable-4meg-pages --enable-global-pages --enable-pae
bootmain.c doesn't work right if the ELF sections aren't
sector-aligned. so you can't use ld -N. and the sections may also need
to be non-zero length, only really matters for tiny "kernels".
kernel loaded at 1 megabyte. stack same place that bootasm.S left it.
kinit() should find real mem size
and rescue useable memory below 1 meg
no paging, no use of page table hardware, just segments
no user area: no magic kernel stack mapping
so no copying of kernel stack during fork
though there is a kernel stack page for each process
no kernel malloc(), just kalloc() for user core
user pointers aren't valid in the kernel
are interrupts turned on in the kernel? yes.
pass curproc explicitly, or implicit from cpu #?
e.g. argument to newproc()?
hmm, you need a global curproc[cpu] for trap() &c
no stack expansion
test running out of memory, process slots
we can't really use a separate stack segment, since stack addresses
need to work correctly as ordinary pointers. the same may be true of
data vs text. how can we have a gap between data and stack, so that
both can grow, without committing 4GB of physical memory? does this
mean we need paging?
perhaps have fixed-size stack, put it in the data segment?
oops, if kernel stack is in contiguous user phys mem, then moving
users' memory (e.g. to expand it) will wreck any pointers into the
kernel stack.
do we need to set fs and gs? so user processes can't abuse them?
setupsegs() may modify current segment table, is that legal?
trap() ought to lgdt on return, since currently only done in swtch()
protect hardware interrupt vectors from user INT instructions?
test out-of-fd cases for creating pipe.
test pipe reader closes then write
test two readers, two writers.
test children being inherited by grandparent &c
some sleep()s should be interruptible by kill()
locks
init_lock
sequences CPU startup
proc_table_lock
also protects next_pid
per-fd lock *just* protects count read-modify-write
also maybe freeness?
memory allocator
printf
in general, the table locks protect both free-ness and
public variables of table elements
in many cases you can use table elements w/o a lock
e.g. if you are the process, or you are using an fd
lock order
per-pipe lock
proc_table_lock fd_table_lock kalloc_lock
console_lock
do you have to be holding the mutex in order to call wakeup()? yes
device interrupts don't clear FL_IF
so a recursive timer interrupt is possible
what does inode->busy mean?
might be held across disk reads
no-one is allowed to do anything to the inode
protected by inode_table_lock
inode->count counts in-memory pointers to the struct
prevents inode[] element from being re-used
protected by inode_table_lock
blocks and inodes have ad-hoc sleep-locks
provide a single mechanism?
kalloc() can return 0; do callers handle this right?
test: one process unlinks a file while another links to it
test: one process opens a file while another deletes it
test: deadlock d/.. vs ../d, two processes.
test: dup() shared fd->off
test: does echo foo > x truncate x?
sh: ioredirection incorrect now we have pipes
sh: chain of pipes won't work, also ugly that parent closes fdarray entries too
sh: dynamic memory allocation?
sh: should sh support ; () &
sh: stop stdin on ctrl-d (for cat > y)
really should have bdwrite() for file content
and make some inode updates async
so soft updates make sense
disk scheduling
echo foo > bar should truncate bar
so O_CREATE should not truncate
but O_TRUNC should
make it work on a real machine
release before acquire at end of sleep?
check 2nd disk (i.e. if not in .bochsrc)
README 0 → 100644
View file @ a4c94803
xv6 is a re-implementation of Dennis Ritchie's and Ken Thompson's Unix
Version 6 (v6). xv6 loosely follows the structure and style of v6,
but is implemented for a modern x86-based multiprocessor using ANSI C.
ACKNOWLEDGMENTS
xv6 is inspired by John Lions's Commentary on UNIX 6th Edition (Peer
to Peer Communications; ISBN: 1-57398-013-7; 1st edition (June 14,
2000)). See also https://pdos.csail.mit.edu/6.828/, which
provides pointers to on-line resources for v6.
xv6 borrows code from the following sources:
JOS (asm.h, elf.h, mmu.h, bootasm.S, ide.c, console.c, and others)
Plan 9 (entryother.S, mp.h, mp.c, lapic.c)
FreeBSD (ioapic.c)
NetBSD (console.c)
The following people have made contributions: Russ Cox (context switching,
locking), Cliff Frey (MP), Xiao Yu (MP), Nickolai Zeldovich, and Austin
Clements.
We are also grateful for the bug reports and patches contributed by Silas
Boyd-Wickizer, Anton Burtsev, Cody Cutler, Mike CAT, Tej Chajed, eyalz800,
Nelson Elhage, Saar Ettinger, Alice Ferrazzi, Nathaniel Filardo, Peter
Froehlich, Yakir Goaron,Shivam Handa, Bryan Henry, Jim Huang, Alexander
Kapshuk, Anders Kaseorg, kehao95, Wolfgang Keller, Eddie Kohler, Austin
Liew, Imbar Marinescu, Yandong Mao, Matan Shabtay, Hitoshi Mitake, Carmi
Merimovich, Mark Morrissey, mtasm, Joel Nider, Greg Price, Ayan Shafqat,
Eldar Sehayek, Yongming Shen, Cam Tenny, tyfkda, Rafael Ubal, Warren
Toomey, Stephen Tu, Pablo Ventura, Xi Wang, Keiichi Watanabe, Nicolas
Wolovick, wxdao, Grant Wu, Jindong Zhang, Icenowy Zheng, and Zou Chang Wei.
The code in the files that constitute xv6 is
Copyright 2006-2018 Frans Kaashoek, Robert Morris, and Russ Cox.
ERROR REPORTS
We switched our focus to xv6 on RISC-V; see the mit-pdos/xv6-riscv.git
repository on github.com.
BUILDING AND RUNNING XV6
To build xv6 on an x86 ELF machine (like Linux or FreeBSD), run
"make". On non-x86 or non-ELF machines (like OS X, even on x86), you
will need to install a cross-compiler gcc suite capable of producing
x86 ELF binaries (see https://pdos.csail.mit.edu/6.828/).
Then run "make TOOLPREFIX=i386-jos-elf-". Now install the QEMU PC
simulator and run "make qemu".
\ No newline at end of file
TRICKS 0 → 100644
View file @ a4c94803
This file lists subtle things that might not be commented
as well as they should be in the source code and that
might be worth pointing out in a longer explanation or in class.
---
[2009/07/12: No longer relevant; forkret1 changed
and this is now cleaner.]
forkret1 in trapasm.S is called with a tf argument.
In order to use it, forkret1 copies the tf pointer into
%esp and then jumps to trapret, which pops the
register state out of the trap frame. If an interrupt
came in between the mov tf, %esp and the iret that
goes back out to user space, the interrupt stack frame
would end up scribbling over the tf and whatever memory
lay under it.
Why is this safe? Because forkret1 is only called
the first time a process returns to user space, and
at that point, cp->tf is set to point to a trap frame
constructed at the top of cp's kernel stack. So tf
*is* a valid %esp that can hold interrupt state.
If other tf's were used in forkret1, we could add
a cli before the mov tf, %esp.
---
In pushcli, must cli() no matter what. It is not safe to do
if(cpus[cpu()].ncli == 0)
cli();
cpus[cpu()].ncli++;
because if interrupts are off then we might call cpu(), get
rescheduled to a different cpu, look at cpus[oldcpu].ncli,
and wrongly decide not to disable interrupts on the new cpu.
Instead do
cli();
cpus[cpu()].ncli++;
always.
---
There is a (harmless) race in pushcli, which does
eflags = readeflags();
cli();
if(c->ncli++ == 0)
c->intena = eflags & FL_IF;
Consider a bottom-level pushcli.
If interrupts are disabled already, then the right thing
happens: read_eflags finds that FL_IF is not set,
and intena = 0. If interrupts are enabled, then
it is less clear that the right thing happens:
the readeflags can execute, then the process
can get preempted and rescheduled on another cpu,
and then once it starts running, perhaps with
interrupts disabled (can happen since the scheduler
only enables interrupts once per scheduling loop,
not every time it schedules a process), it will
incorrectly record that interrupts *were* enabled.
This doesn't matter, because if it was safe to be
running with interrupts enabled before the context
switch, it is still safe (and arguably more correct)
to run with them enabled after the context switch too.
In fact it would be safe if scheduler always set
c->intena = 1;
before calling swtch, and perhaps it should.
---
The x86's processor-ordering memory model
matches spin locks well, so no explicit memory
synchronization instructions are required in
acquire and release.
Consider two sequences of code on different CPUs:
CPU0
A;
release(lk);
and
CPU1
acquire(lk);
B;
We want to make sure that:
- all reads in B see the effects of writes in A.
- all reads in A do *not* see the effects of writes in B.
The x86 guarantees that writes in A will go out
to memory before the write of lk->locked = 0 in
release(lk). It further guarantees that CPU1
will observe CPU0's write of lk->locked = 0 only
after observing the earlier writes by CPU0.
So any reads in B are guaranteed to observe the
effects of writes in A.
According to the Intel manual behavior spec, the
second condition requires a serialization instruction
in release, to avoid reads in A happening after giving
up lk. No Intel SMP processor in existence actually
moves reads down after writes, but the language in
the spec allows it. There is no telling whether future
processors will need it.
---
The code in fork needs to read np->pid before
setting np->state to RUNNABLE. The following
is not a correct way to do this:
int
fork(void)
{
...
np->state = RUNNABLE;
return np->pid; // oops
}
After setting np->state to RUNNABLE, some other CPU
might run the process, it might exit, and then it might
get reused for a different process (with a new pid), all
before the return statement. So it's not safe to just
"return np->pid". Even saving a copy of np->pid before
setting np->state isn't safe, since the compiler is
allowed to re-order statements.
The real code saves a copy of np->pid, then acquires a lock
around the write to np->state. The acquire() prevents the
compiler from re-ordering.
asm.h 0 → 100644
View file @ a4c94803
//
// assembler macros to create x86 segments
//
#define SEG_NULLASM \
.word 0, 0; \
.byte 0, 0, 0, 0
// The 0xC0 means the limit is in 4096-byte units
// and (for executable segments) 32-bit mode.
#define SEG_ASM(type,base,lim) \
.word (((lim) >> 12) & 0xffff), ((base) & 0xffff); \
.byte (((base) >> 16) & 0xff), (0x90 | (type)), \
(0xC0 | (((lim) >> 28) & 0xf)), (((base) >> 24) & 0xff)
#define STA_X 0x8 // Executable segment
#define STA_W 0x2 // Writeable (non-executable segments)
#define STA_R 0x2 // Readable (executable segments)
bio.c 0 → 100644
View file @ a4c94803
// Buffer cache.
//
// The buffer cache is a linked list of buf structures holding
// cached copies of disk block contents. Caching disk blocks
// in memory reduces the number of disk reads and also provides
// a synchronization point for disk blocks used by multiple processes.
//
// Interface:
// * To get a buffer for a particular disk block, call bread.
// * After changing buffer data, call bwrite to write it to disk.
// * When done with the buffer, call brelse.
// * Do not use the buffer after calling brelse.
// * Only one process at a time can use a buffer,
// so do not keep them longer than necessary.
//
// The implementation uses two state flags internally:
// * B_VALID: the buffer data has been read from the disk.
// * B_DIRTY: the buffer data has been modified
// and needs to be written to disk.
#include "types.h"
#include "defs.h"
#include "param.h"
#include "spinlock.h"
#include "sleeplock.h"
#include "fs.h"
#include "buf.h"
struct {
struct spinlock lock;
struct buf buf[NBUF];
// Linked list of all buffers, through prev/next.
// head.next is most recently used.
struct buf head;
} bcache;
void
binit(void)
{
struct buf *b;
initlock(&bcache.lock, "bcache");
//PAGEBREAK!
// Create linked list of buffers
bcache.head.prev = &bcache.head;
bcache.head.next = &bcache.head;
for(b = bcache.buf; b < bcache.buf+NBUF; b++){
b->next = bcache.head.next;
b->prev = &bcache.head;
initsleeplock(&b->lock, "buffer");
bcache.head.next->prev = b;
bcache.head.next = b;
}
}
// Look through buffer cache for block on device dev.
// If not found, allocate a buffer.
// In either case, return locked buffer.
static struct buf*
bget(uint dev, uint blockno)
{
struct buf *b;
acquire(&bcache.lock);
// Is the block already cached?
for(b = bcache.head.next; b != &bcache.head; b = b->next){
if(b->dev == dev && b->blockno == blockno){
b->refcnt++;
release(&bcache.lock);
acquiresleep(&b->lock);
return b;
}
}
// Not cached; recycle an unused buffer.
// Even if refcnt==0, B_DIRTY indicates a buffer is in use
// because log.c has modified it but not yet committed it.
for(b = bcache.head.prev; b != &bcache.head; b = b->prev){
if(b->refcnt == 0 && (b->flags & B_DIRTY) == 0) {
b->dev = dev;
b->blockno = blockno;
b->flags = 0;
b->refcnt = 1;
release(&bcache.lock);
acquiresleep(&b->lock);
return b;
}
}
panic("bget: no buffers");
}
// Return a locked buf with the contents of the indicated block.
struct buf*
bread(uint dev, uint blockno)
{
struct buf *b;
b = bget(dev, blockno);
if((b->flags & B_VALID) == 0) {
iderw(b);
}
return b;
}
// Write b's contents to disk. Must be locked.
void
bwrite(struct buf *b)
{
if(!holdingsleep(&b->lock))
panic("bwrite");
b->flags |= B_DIRTY;
iderw(b);
}
// Release a locked buffer.
// Move to the head of the MRU list.
void
brelse(struct buf *b)
{
if(!holdingsleep(&b->lock))
panic("brelse");
releasesleep(&b->lock);
acquire(&bcache.lock);
b->refcnt--;
if (b->refcnt == 0) {
// no one is waiting for it.
b->next->prev = b->prev;
b->prev->next = b->next;
b->next = bcache.head.next;
b->prev = &bcache.head;
bcache.head.next->prev = b;
bcache.head.next = b;
}
release(&bcache.lock);
}
//PAGEBREAK!
// Blank page.
bootasm.S 0 → 100644
View file @ a4c94803
#include "asm.h"
#include "memlayout.h"
#include "mmu.h"
# Start the first CPU: switch to 32-bit protected mode, jump into C.
# The BIOS loads this code from the first sector of the hard disk into
# memory at physical address 0x7c00 and starts executing in real mode
# with %cs=0 %ip=7c00.
.code16 # Assemble for 16-bit mode
.globl start
start:
cli # BIOS enabled interrupts; disable
# Zero data segment registers DS, ES, and SS.
xorw %ax,%ax # Set %ax to zero
movw %ax,%ds # -> Data Segment
movw %ax,%es # -> Extra Segment
movw %ax,%ss # -> Stack Segment
# Physical address line A20 is tied to zero so that the first PCs
# with 2 MB would run software that assumed 1 MB. Undo that.
seta20.1:
inb $0x64,%al # Wait for not busy
testb $0x2,%al
jnz seta20.1
movb $0xd1,%al # 0xd1 -> port 0x64
outb %al,$0x64
seta20.2:
inb $0x64,%al # Wait for not busy
testb $0x2,%al
jnz seta20.2
movb $0xdf,%al # 0xdf -> port 0x60
outb %al,$0x60
# Switch from real to protected mode. Use a bootstrap GDT that makes
# virtual addresses map directly to physical addresses so that the
# effective memory map doesn't change during the transition.
lgdt gdtdesc
movl %cr0, %eax
orl $CR0_PE, %eax
movl %eax, %cr0
//PAGEBREAK!
# Complete the transition to 32-bit protected mode by using a long jmp
# to reload %cs and %eip. The segment descriptors are set up with no
# translation, so that the mapping is still the identity mapping.
ljmp $(SEG_KCODE<<3), $start32
.code32 # Tell assembler to generate 32-bit code now.
start32:
# Set up the protected-mode data segment registers
movw $(SEG_KDATA<<3), %ax # Our data segment selector
movw %ax, %ds # -> DS: Data Segment
movw %ax, %es # -> ES: Extra Segment
movw %ax, %ss # -> SS: Stack Segment
movw $0, %ax # Zero segments not ready for use
movw %ax, %fs # -> FS
movw %ax, %gs # -> GS
# Set up the stack pointer and call into C.
movl $start, %esp
call bootmain
# If bootmain returns (it shouldn't), trigger a Bochs
# breakpoint if running under Bochs, then loop.
movw $0x8a00, %ax # 0x8a00 -> port 0x8a00
movw %ax, %dx
outw %ax, %dx
movw $0x8ae0, %ax # 0x8ae0 -> port 0x8a00
outw %ax, %dx
spin:
jmp spin
# Bootstrap GDT
.p2align 2 # force 4 byte alignment
gdt:
SEG_NULLASM # null seg
SEG_ASM(STA_X|STA_R, 0x0, 0xffffffff) # code seg
SEG_ASM(STA_W, 0x0, 0xffffffff) # data seg
gdtdesc:
.word (gdtdesc - gdt - 1) # sizeof(gdt) - 1
.long gdt # address gdt
bootmain.c 0 → 100644
View file @ a4c94803
// Boot loader.
//
// Part of the boot block, along with bootasm.S, which calls bootmain().
// bootasm.S has put the processor into protected 32-bit mode.
// bootmain() loads an ELF kernel image from the disk starting at
// sector 1 and then jumps to the kernel entry routine.
#include "types.h"
#include "elf.h"
#include "x86.h"
#include "memlayout.h"
#define SECTSIZE 512
void readseg(uchar*, uint, uint);
void
bootmain(void)
{
struct elfhdr *elf;
struct proghdr *ph, *eph;
void (*entry)(void);
uchar* pa;
elf = (struct elfhdr*)0x10000; // scratch space
// Read 1st page off disk
readseg((uchar*)elf, 4096, 0);
// Is this an ELF executable?
if(elf->magic != ELF_MAGIC)
return; // let bootasm.S handle error
// Load each program segment (ignores ph flags).
ph = (struct proghdr*)((uchar*)elf + elf->phoff);
eph = ph + elf->phnum;
for(; ph < eph; ph++){
pa = (uchar*)ph->paddr;
readseg(pa, ph->filesz, ph->off);
if(ph->memsz > ph->filesz)
stosb(pa + ph->filesz, 0, ph->memsz - ph->filesz);
}
// Call the entry point from the ELF header.
// Does not return!
entry = (void(*)(void))(elf->entry);
entry();
}
void
waitdisk(void)
{
// Wait for disk ready.
while((inb(0x1F7) & 0xC0) != 0x40)
;
}
// Read a single sector at offset into dst.
void
readsect(void *dst, uint offset)
{
// Issue command.
waitdisk();
outb(0x1F2, 1); // count = 1
outb(0x1F3, offset);
outb(0x1F4, offset >> 8);
outb(0x1F5, offset >> 16);
outb(0x1F6, (offset >> 24) | 0xE0);
outb(0x1F7, 0x20); // cmd 0x20 - read sectors
// Read data.
waitdisk();
insl(0x1F0, dst, SECTSIZE/4);
}
// Read 'count' bytes at 'offset' from kernel into physical address 'pa'.
// Might copy more than asked.
void
readseg(uchar* pa, uint count, uint offset)
{
uchar* epa;
epa = pa + count;
// Round down to sector boundary.
pa -= offset % SECTSIZE;
// Translate from bytes to sectors; kernel starts at sector 1.
offset = (offset / SECTSIZE) + 1;
// If this is too slow, we could read lots of sectors at a time.
// We'd write more to memory than asked, but it doesn't matter --
// we load in increasing order.
for(; pa < epa; pa += SECTSIZE, offset++)
readsect(pa, offset);
}
buf.h 0 → 100644
View file @ a4c94803
struct buf {
int flags;
uint dev;
uint blockno;
struct sleeplock lock;
uint refcnt;
struct buf *prev; // LRU cache list
struct buf *next;
struct buf *qnext; // disk queue
uchar data[BSIZE];
};
#define B_VALID 0x2 // buffer has been read from disk
#define B_DIRTY 0x4 // buffer needs to be written to disk
cat.c 0 → 100644
View file @ a4c94803
#include "types.h"
#include "stat.h"
#include "user.h"
char buf[512];
void
cat(int fd)
{
int n;
while((n = read(fd, buf, sizeof(buf))) > 0) {
if (write(1, buf, n) != n) {
printf(1, "cat: write error\n");
exit();
}
}
if(n < 0){
printf(1, "cat: read error\n");
exit();
}
}
int
main(int argc, char *argv[])
{
int fd, i;
if(argc <= 1){
cat(0);
exit();
}
for(i = 1; i < argc; i++){
if((fd = open(argv[i], 0)) < 0){
printf(1, "cat: cannot open %s\n", argv[i]);
exit();
}
cat(fd);
close(fd);
}
exit();
}
console.c 0 → 100644
View file @ a4c94803
// Console input and output.
// Input is from the keyboard or serial port.
// Output is written to the screen and serial port.
#include "types.h"
#include "defs.h"
#include "param.h"
#include "traps.h"
#include "spinlock.h"
#include "sleeplock.h"
#include "fs.h"
#include "file.h"
#include "memlayout.h"
#include "mmu.h"
#include "proc.h"
#include "x86.h"
static void consputc(int);
static int panicked = 0;
static struct {
struct spinlock lock;
int locking;
} cons;
static void
printint(int xx, int base, int sign)
{
static char digits[] = "0123456789abcdef";
char buf[16];
int i;
uint x;
if(sign && (sign = xx < 0))
x = -xx;
else
x = xx;
i = 0;
do{
buf[i++] = digits[x % base];
}while((x /= base) != 0);
if(sign)
buf[i++] = '-';
while(--i >= 0)
consputc(buf[i]);
}
//PAGEBREAK: 50
// Print to the console. only understands %d, %x, %p, %s.
void
cprintf(char *fmt, ...)
{
int i, c, locking;
uint *argp;
char *s;
locking = cons.locking;
if(locking)
acquire(&cons.lock);
if (fmt == 0)
panic("null fmt");
argp = (uint*)(void*)(&fmt + 1);
for(i = 0; (c = fmt[i] & 0xff) != 0; i++){
if(c != '%'){
consputc(c);
continue;
}
c = fmt[++i] & 0xff;
if(c == 0)
break;
switch(c){
case 'd':
printint(*argp++, 10, 1);
break;
case 'x':
case 'p':
printint(*argp++, 16, 0);
break;
case 's':
if((s = (char*)*argp++) == 0)
s = "(null)";
for(; *s; s++)
consputc(*s);
break;
case '%':
consputc('%');
break;
default:
// Print unknown % sequence to draw attention.
consputc('%');
consputc(c);
break;
}
}
if(locking)
release(&cons.lock);
}
void
panic(char *s)
{
int i;
uint pcs[10];
cli();
cons.locking = 0;
// use lapiccpunum so that we can call panic from mycpu()
cprintf("lapicid %d: panic: ", lapicid());
cprintf(s);
cprintf("\n");
getcallerpcs(&s, pcs);
for(i=0; i<10; i++)
cprintf(" %p", pcs[i]);
panicked = 1; // freeze other CPU
for(;;)
;
}
//PAGEBREAK: 50
#define BACKSPACE 0x100
#define CRTPORT 0x3d4
static ushort *crt = (ushort*)P2V(0xb8000); // CGA memory
static void
cgaputc(int c)
{
int pos;
// Cursor position: col + 80*row.
outb(CRTPORT, 14);
pos = inb(CRTPORT+1) << 8;
outb(CRTPORT, 15);
pos |= inb(CRTPORT+1);
if(c == '\n')
pos += 80 - pos%80;
else if(c == BACKSPACE){
if(pos > 0) --pos;
} else
crt[pos++] = (c&0xff) | 0x0700; // black on white
if(pos < 0 || pos > 25*80)
panic("pos under/overflow");
if((pos/80) >= 24){ // Scroll up.
memmove(crt, crt+80, sizeof(crt[0])*23*80);
pos -= 80;
memset(crt+pos, 0, sizeof(crt[0])*(24*80 - pos));
}
outb(CRTPORT, 14);
outb(CRTPORT+1, pos>>8);
outb(CRTPORT, 15);
outb(CRTPORT+1, pos);
crt[pos] = ' ' | 0x0700;
}
void
consputc(int c)
{
if(panicked){
cli();
for(;;)
;
}
if(c == BACKSPACE){
uartputc('\b'); uartputc(' '); uartputc('\b');
} else
uartputc(c);
cgaputc(c);
}
#define INPUT_BUF 128
struct {
char buf[INPUT_BUF];
uint r; // Read index
uint w; // Write index
uint e; // Edit index
} input;
#define C(x) ((x)-'@') // Control-x
void
consoleintr(int (*getc)(void))
{
int c, doprocdump = 0;
acquire(&cons.lock);
while((c = getc()) >= 0){
switch(c){
case C('P'): // Process listing.
// procdump() locks cons.lock indirectly; invoke later
doprocdump = 1;
break;
case C('U'): // Kill line.
while(input.e != input.w &&
input.buf[(input.e-1) % INPUT_BUF] != '\n'){
input.e--;
consputc(BACKSPACE);
}
break;
case C('H'): case '\x7f': // Backspace
if(input.e != input.w){
input.e--;
consputc(BACKSPACE);
}
break;
default:
if(c != 0 && input.e-input.r < INPUT_BUF){
c = (c == '\r') ? '\n' : c;
input.buf[input.e++ % INPUT_BUF] = c;
consputc(c);
if(c == '\n' || c == C('D') || input.e == input.r+INPUT_BUF){
input.w = input.e;
wakeup(&input.r);
}
}
break;
}
}
release(&cons.lock);
if(doprocdump) {
procdump(); // now call procdump() wo. cons.lock held
}
}
int
consoleread(struct inode *ip, char *dst, int n)
{
uint target;
int c;
iunlock(ip);
target = n;
acquire(&cons.lock);
while(n > 0){
while(input.r == input.w){
if(myproc()->killed){
release(&cons.lock);
ilock(ip);
return -1;
}
sleep(&input.r, &cons.lock);
}
c = input.buf[input.r++ % INPUT_BUF];
if(c == C('D')){ // EOF
if(n < target){
// Save ^D for next time, to make sure
// caller gets a 0-byte result.
input.r--;
}
break;
}
*dst++ = c;
--n;
if(c == '\n')
break;
}
release(&cons.lock);
ilock(ip);
return target - n;
}
int
consolewrite(struct inode *ip, char *buf, int n)
{
int i;
iunlock(ip);
acquire(&cons.lock);
for(i = 0; i < n; i++)
consputc(buf[i] & 0xff);
release(&cons.lock);
ilock(ip);
return n;
}
void
consoleinit(void)
{
initlock(&cons.lock, "console");
devsw[CONSOLE].write = consolewrite;
devsw[CONSOLE].read = consoleread;
cons.locking = 1;
ioapicenable(IRQ_KBD, 0);
}
cuth 0 → 100755
View file @ a4c94803
#!/usr/bin/perl
$| = 1;
sub writefile($@){
my ($file, @lines) = @_;
sleep(1);
open(F, ">$file") || die "open >$file: $!";
print F @lines;
close(F);
}
# Cut out #include lines that don't contribute anything.
for($i=0; $i<@ARGV; $i++){
$file = $ARGV[$i];
if(!open(F, $file)){
print STDERR "open $file: $!\n";
next;
}
@lines = <F>;
close(F);
$obj = "$file.o";
$obj =~ s/\.c\.o$/.o/;
system("touch $file");
if(system("make CC='gcc -Werror' $obj >/dev/null 2>\&1") != 0){
print STDERR "make $obj failed: $rv\n";
next;
}
system("cp $file =$file");
for($j=@lines-1; $j>=0; $j--){
if($lines[$j] =~ /^#include/){
$old = $lines[$j];
$lines[$j] = "/* CUT-H */\n";
writefile($file, @lines);
if(system("make CC='gcc -Werror' $obj >/dev/null 2>\&1") != 0){
$lines[$j] = $old;
}else{
print STDERR "$file $old";
}
}
}
writefile($file, grep {!/CUT-H/} @lines);
system("rm =$file");
}
date.h 0 → 100644
View file @ a4c94803
struct rtcdate {
uint second;
uint minute;
uint hour;
uint day;
uint month;
uint year;
};
defs.h 0 → 100644
View file @ a4c94803
struct buf;
struct context;
struct file;
struct inode;
struct pipe;
struct proc;
struct rtcdate;
struct spinlock;
struct sleeplock;
struct stat;
struct superblock;
// bio.c
void binit(void);
struct buf* bread(uint, uint);
void brelse(struct buf*);
void bwrite(struct buf*);
// console.c
void consoleinit(void);
void cprintf(char*, ...);
void consoleintr(int(*)(void));
void panic(char*) __attribute__((noreturn));
// exec.c
int exec(char*, char**);
// file.c
struct file* filealloc(void);
void fileclose(struct file*);
struct file* filedup(struct file*);
void fileinit(void);
int fileread(struct file*, char*, int n);
int filestat(struct file*, struct stat*);
int filewrite(struct file*, char*, int n);
// fs.c
void readsb(int dev, struct superblock *sb);
int dirlink(struct inode*, char*, uint);
struct inode* dirlookup(struct inode*, char*, uint*);
struct inode* ialloc(uint, short);
struct inode* idup(struct inode*);
void iinit(int dev);
void ilock(struct inode*);
void iput(struct inode*);
void iunlock(struct inode*);
void iunlockput(struct inode*);
void iupdate(struct inode*);
int namecmp(const char*, const char*);
struct inode* namei(char*);
struct inode* nameiparent(char*, char*);
int readi(struct inode*, char*, uint, uint);
void stati(struct inode*, struct stat*);
int writei(struct inode*, char*, uint, uint);
// ide.c
void ideinit(void);
void ideintr(void);
void iderw(struct buf*);
// ioapic.c
void ioapicenable(int irq, int cpu);
extern uchar ioapicid;
void ioapicinit(void);
// kalloc.c
char* kalloc(void);
void kfree(char*);
void kinit1(void*, void*);
void kinit2(void*, void*);
// kbd.c
void kbdintr(void);
// lapic.c
void cmostime(struct rtcdate *r);
int lapicid(void);
extern volatile uint* lapic;
void lapiceoi(void);
void lapicinit(void);
void lapicstartap(uchar, uint);
void microdelay(int);
// log.c
void initlog(int dev);
void log_write(struct buf*);
void begin_op();
void end_op();
// mp.c
extern int ismp;
void mpinit(void);
// picirq.c
void picenable(int);
void picinit(void);
// pipe.c
int pipealloc(struct file**, struct file**);
void pipeclose(struct pipe*, int);
int piperead(struct pipe*, char*, int);
int pipewrite(struct pipe*, char*, int);
//PAGEBREAK: 16
// proc.c
int cpuid(void);
void exit(void);
int fork(void);
int growproc(int);
int kill(int);
struct cpu* mycpu(void);
struct proc* myproc();
void pinit(void);
void procdump(void);
void scheduler(void) __attribute__((noreturn));
void sched(void);
void setproc(struct proc*);
void sleep(void*, struct spinlock*);
void userinit(void);
int wait(void);
void wakeup(void*);
void yield(void);
// swtch.S
void swtch(struct context**, struct context*);
// spinlock.c
void acquire(struct spinlock*);
void getcallerpcs(void*, uint*);
int holding(struct spinlock*);
void initlock(struct spinlock*, char*);
void release(struct spinlock*);
void pushcli(void);
void popcli(void);
// sleeplock.c
void acquiresleep(struct sleeplock*);
void releasesleep(struct sleeplock*);
int holdingsleep(struct sleeplock*);
void initsleeplock(struct sleeplock*, char*);
// string.c
int memcmp(const void*, const void*, uint);
void* memmove(void*, const void*, uint);
void* memset(void*, int, uint);
char* safestrcpy(char*, const char*, int);
int strlen(const char*);
int strncmp(const char*, const char*, uint);
char* strncpy(char*, const char*, int);
// syscall.c
int argint(int, int*);
int argptr(int, char**, int);
int argstr(int, char**);
int fetchint(uint, int*);
int fetchstr(uint, char**);
void syscall(void);
// timer.c
void timerinit(void);
// trap.c
void idtinit(void);
extern uint ticks;
void tvinit(void);
extern struct spinlock tickslock;
// uart.c
void uartinit(void);
void uartintr(void);
void uartputc(int);
// vm.c
void seginit(void);
void kvmalloc(void);
pde_t* setupkvm(void);
char* uva2ka(pde_t*, char*);
int allocuvm(pde_t*, uint, uint);
int deallocuvm(pde_t*, uint, uint);
void freevm(pde_t*);
void inituvm(pde_t*, char*, uint);
int loaduvm(pde_t*, char*, struct inode*, uint, uint);
pde_t* copyuvm(pde_t*, uint);
void switchuvm(struct proc*);
void switchkvm(void);
int copyout(pde_t*, uint, void*, uint);
void clearpteu(pde_t *pgdir, char *uva);
// number of elements in fixed-size array
#define NELEM(x) (sizeof(x)/sizeof((x)[0]))
dot-bochsrc 0 → 100755
View file @ a4c94803
This diff is collapsed.
echo.c 0 → 100644
View file @ a4c94803
#include "types.h"
#include "stat.h"
#include "user.h"
int
main(int argc, char *argv[])
{
int i;
for(i = 1; i < argc; i++)
printf(1, "%s%s", argv[i], i+1 < argc ? " " : "\n");
exit();
}
elf.h 0 → 100644
View file @ a4c94803
// Format of an ELF executable file
#define ELF_MAGIC 0x464C457FU // "\x7FELF" in little endian
// File header
struct elfhdr {
uint magic; // must equal ELF_MAGIC
uchar elf[12];
ushort type;
ushort machine;
uint version;
uint entry;
uint phoff;
uint shoff;
uint flags;
ushort ehsize;
ushort phentsize;
ushort phnum;
ushort shentsize;
ushort shnum;
ushort shstrndx;
};
// Program section header
struct proghdr {
uint type;
uint off;
uint vaddr;
uint paddr;
uint filesz;
uint memsz;
uint flags;
uint align;
};
// Values for Proghdr type
#define ELF_PROG_LOAD 1
// Flag bits for Proghdr flags
#define ELF_PROG_FLAG_EXEC 1
#define ELF_PROG_FLAG_WRITE 2
#define ELF_PROG_FLAG_READ 4
entry.S 0 → 100644
View file @ a4c94803
# The xv6 kernel starts executing in this file. This file is linked with
# the kernel C code, so it can refer to kernel symbols such as main().
# The boot block (bootasm.S and bootmain.c) jumps to entry below.
# Multiboot header, for multiboot boot loaders like GNU Grub.
# http://www.gnu.org/software/grub/manual/multiboot/multiboot.html
#
# Using GRUB 2, you can boot xv6 from a file stored in a
# Linux file system by copying kernel or kernelmemfs to /boot
# and then adding this menu entry:
#
# menuentry "xv6" {
# insmod ext2
# set root='(hd0,msdos1)'
# set kernel='/boot/kernel'
# echo "Loading ${kernel}..."
# multiboot ${kernel} ${kernel}
# boot
# }
#include "asm.h"
#include "memlayout.h"
#include "mmu.h"
#include "param.h"
# Multiboot header. Data to direct multiboot loader.
.p2align 2
.text
.globl multiboot_header
multiboot_header:
#define magic 0x1badb002
#define flags 0
.long magic
.long flags
.long (-magic-flags)
# By convention, the _start symbol specifies the ELF entry point.
# Since we haven't set up virtual memory yet, our entry point is
# the physical address of 'entry'.
.globl _start
_start = V2P_WO(entry)
# Entering xv6 on boot processor, with paging off.
.globl entry
entry:
# Turn on page size extension for 4Mbyte pages
movl %cr4, %eax
orl $(CR4_PSE), %eax
movl %eax, %cr4
# Set page directory
movl $(V2P_WO(entrypgdir)), %eax
movl %eax, %cr3
# Turn on paging.
movl %cr0, %eax
orl $(CR0_PG|CR0_WP), %eax
movl %eax, %cr0
# Set up the stack pointer.
movl $(stack + KSTACKSIZE), %esp
# Jump to main(), and switch to executing at
# high addresses. The indirect call is needed because
# the assembler produces a PC-relative instruction
# for a direct jump.
mov $main, %eax
jmp *%eax
.comm stack, KSTACKSIZE
entryother.S 0 → 100644
View file @ a4c94803
#include "asm.h"
#include "memlayout.h"
#include "mmu.h"
# Each non-boot CPU ("AP") is started up in response to a STARTUP
# IPI from the boot CPU. Section B.4.2 of the Multi-Processor
# Specification says that the AP will start in real mode with CS:IP
# set to XY00:0000, where XY is an 8-bit value sent with the
# STARTUP. Thus this code must start at a 4096-byte boundary.
#
# Because this code sets DS to zero, it must sit
# at an address in the low 2^16 bytes.
#
# Startothers (in main.c) sends the STARTUPs one at a time.
# It copies this code (start) at 0x7000. It puts the address of
# a newly allocated per-core stack in start-4,the address of the
# place to jump to (mpenter) in start-8, and the physical address
# of entrypgdir in start-12.
#
# This code combines elements of bootasm.S and entry.S.
.code16
.globl start
start:
cli
# Zero data segment registers DS, ES, and SS.
xorw %ax,%ax
movw %ax,%ds
movw %ax,%es
movw %ax,%ss
# Switch from real to protected mode. Use a bootstrap GDT that makes
# virtual addresses map directly to physical addresses so that the
# effective memory map doesn't change during the transition.
lgdt gdtdesc
movl %cr0, %eax
orl $CR0_PE, %eax
movl %eax, %cr0
# Complete the transition to 32-bit protected mode by using a long jmp
# to reload %cs and %eip. The segment descriptors are set up with no
# translation, so that the mapping is still the identity mapping.
ljmpl $(SEG_KCODE<<3), $(start32)
//PAGEBREAK!
.code32 # Tell assembler to generate 32-bit code now.
start32:
# Set up the protected-mode data segment registers
movw $(SEG_KDATA<<3), %ax # Our data segment selector
movw %ax, %ds # -> DS: Data Segment
movw %ax, %es # -> ES: Extra Segment
movw %ax, %ss # -> SS: Stack Segment
movw $0, %ax # Zero segments not ready for use
movw %ax, %fs # -> FS
movw %ax, %gs # -> GS
# Turn on page size extension for 4Mbyte pages
movl %cr4, %eax
orl $(CR4_PSE), %eax
movl %eax, %cr4
# Use entrypgdir as our initial page table
movl (start-12), %eax
movl %eax, %cr3
# Turn on paging.
movl %cr0, %eax
orl $(CR0_PE|CR0_PG|CR0_WP), %eax
movl %eax, %cr0
# Switch to the stack allocated by startothers()
movl (start-4), %esp
# Call mpenter()
call *(start-8)
movw $0x8a00, %ax
movw %ax, %dx
outw %ax, %dx
movw $0x8ae0, %ax
outw %ax, %dx
spin:
jmp spin
.p2align 2
gdt:
SEG_NULLASM
SEG_ASM(STA_X|STA_R, 0, 0xffffffff)
SEG_ASM(STA_W, 0, 0xffffffff)
gdtdesc:
.word (gdtdesc - gdt - 1)
.long gdt
exec.c 0 → 100644
View file @ a4c94803
#include "types.h"
#include "param.h"
#include "memlayout.h"
#include "mmu.h"
#include "proc.h"
#include "defs.h"
#include "x86.h"
#include "elf.h"
int
exec(char *path, char **argv)
{
char *s, *last;
int i, off;
uint argc, sz, sp, ustack[3+MAXARG+1];
struct elfhdr elf;
struct inode *ip;
struct proghdr ph;
pde_t *pgdir, *oldpgdir;
struct proc *curproc = myproc();
begin_op();
if((ip = namei(path)) == 0){
end_op();
cprintf("exec: fail\n");
return -1;
}
ilock(ip);
pgdir = 0;
// Check ELF header
if(readi(ip, (char*)&elf, 0, sizeof(elf)) != sizeof(elf))
goto bad;
if(elf.magic != ELF_MAGIC)
goto bad;
if((pgdir = setupkvm()) == 0)
goto bad;
// Load program into memory.
sz = 0;
for(i=0, off=elf.phoff; i<elf.phnum; i++, off+=sizeof(ph)){
if(readi(ip, (char*)&ph, off, sizeof(ph)) != sizeof(ph))
goto bad;
if(ph.type != ELF_PROG_LOAD)
continue;
if(ph.memsz < ph.filesz)
goto bad;
if(ph.vaddr + ph.memsz < ph.vaddr)
goto bad;
if((sz = allocuvm(pgdir, sz, ph.vaddr + ph.memsz)) == 0)
goto bad;
if(ph.vaddr % PGSIZE != 0)
goto bad;
if(loaduvm(pgdir, (char*)ph.vaddr, ip, ph.off, ph.filesz) < 0)
goto bad;
}
iunlockput(ip);
end_op();
ip = 0;
// Allocate two pages at the next page boundary.
// Make the first inaccessible. Use the second as the user stack.
sz = PGROUNDUP(sz);
if((sz = allocuvm(pgdir, sz, sz + 2*PGSIZE)) == 0)
goto bad;
clearpteu(pgdir, (char*)(sz - 2*PGSIZE));
sp = sz;
// Push argument strings, prepare rest of stack in ustack.
for(argc = 0; argv[argc]; argc++) {
if(argc >= MAXARG)
goto bad;
sp = (sp - (strlen(argv[argc]) + 1)) & ~3;
if(copyout(pgdir, sp, argv[argc], strlen(argv[argc]) + 1) < 0)
goto bad;
ustack[3+argc] = sp;
}
ustack[3+argc] = 0;
ustack[0] = 0xffffffff; // fake return PC
ustack[1] = argc;
ustack[2] = sp - (argc+1)*4; // argv pointer
sp -= (3+argc+1) * 4;
if(copyout(pgdir, sp, ustack, (3+argc+1)*4) < 0)
goto bad;
// Save program name for debugging.
for(last=s=path; *s; s++)
if(*s == '/')
last = s+1;
safestrcpy(curproc->name, last, sizeof(curproc->name));
// Commit to the user image.
oldpgdir = curproc->pgdir;
curproc->pgdir = pgdir;
curproc->sz = sz;
curproc->tf->eip = elf.entry; // main
curproc->tf->esp = sp;
switchuvm(curproc);
freevm(oldpgdir);
return 0;
bad:
if(pgdir)
freevm(pgdir);
if(ip){
iunlockput(ip);
end_op();
}
return -1;
}
fcntl.h 0 → 100644
View file @ a4c94803
#define O_RDONLY 0x000
#define O_WRONLY 0x001
#define O_RDWR 0x002
#define O_CREATE 0x200
file.c 0 → 100644
View file @ a4c94803
//
// File descriptors
//
#include "types.h"
#include "defs.h"
#include "param.h"
#include "fs.h"
#include "spinlock.h"
#include "sleeplock.h"
#include "file.h"
struct devsw devsw[NDEV];
struct {
struct spinlock lock;
struct file file[NFILE];
} ftable;
void
fileinit(void)
{
initlock(&ftable.lock, "ftable");
}
// Allocate a file structure.
struct file*
filealloc(void)
{
struct file *f;
acquire(&ftable.lock);
for(f = ftable.file; f < ftable.file + NFILE; f++){
if(f->ref == 0){
f->ref = 1;
release(&ftable.lock);
return f;
}
}
release(&ftable.lock);
return 0;
}
// Increment ref count for file f.
struct file*
filedup(struct file *f)
{
acquire(&ftable.lock);
if(f->ref < 1)
panic("filedup");
f->ref++;
release(&ftable.lock);
return f;
}
// Close file f. (Decrement ref count, close when reaches 0.)
void
fileclose(struct file *f)
{
struct file ff;
acquire(&ftable.lock);
if(f->ref < 1)
panic("fileclose");
if(--f->ref > 0){
release(&ftable.lock);
return;
}
ff = *f;
f->ref = 0;
f->type = FD_NONE;
release(&ftable.lock);
if(ff.type == FD_PIPE)
pipeclose(ff.pipe, ff.writable);
else if(ff.type == FD_INODE){
begin_op();
iput(ff.ip);
end_op();
}
}
// Get metadata about file f.
int
filestat(struct file *f, struct stat *st)
{
if(f->type == FD_INODE){
ilock(f->ip);
stati(f->ip, st);
iunlock(f->ip);
return 0;
}
return -1;
}
// Read from file f.
int
fileread(struct file *f, char *addr, int n)
{
int r;
if(f->readable == 0)
return -1;
if(f->type == FD_PIPE)
return piperead(f->pipe, addr, n);
if(f->type == FD_INODE){
ilock(f->ip);
if((r = readi(f->ip, addr, f->off, n)) > 0)
f->off += r;
iunlock(f->ip);
return r;
}
panic("fileread");
}
//PAGEBREAK!
// Write to file f.
int
filewrite(struct file *f, char *addr, int n)
{
int r;
if(f->writable == 0)
return -1;
if(f->type == FD_PIPE)
return pipewrite(f->pipe, addr, n);
if(f->type == FD_INODE){
// write a few blocks at a time to avoid exceeding
// the maximum log transaction size, including
// i-node, indirect block, allocation blocks,
// and 2 blocks of slop for non-aligned writes.
// this really belongs lower down, since writei()
// might be writing a device like the console.
int max = ((MAXOPBLOCKS-1-1-2) / 2) * 512;
int i = 0;
while(i < n){
int n1 = n - i;
if(n1 > max)
n1 = max;
begin_op();
ilock(f->ip);
if ((r = writei(f->ip, addr + i, f->off, n1)) > 0)
f->off += r;
iunlock(f->ip);
end_op();
if(r < 0)
break;
if(r != n1)
panic("short filewrite");
i += r;
}
return i == n ? n : -1;
}
panic("filewrite");
}
file.h 0 → 100644
View file @ a4c94803
struct file {
enum { FD_NONE, FD_PIPE, FD_INODE } type;
int ref; // reference count
char readable;
char writable;
struct pipe *pipe;
struct inode *ip;
uint off;
};
// in-memory copy of an inode
struct inode {
uint dev; // Device number
uint inum; // Inode number
int ref; // Reference count
struct sleeplock lock; // protects everything below here
int valid; // inode has been read from disk?
short type; // copy of disk inode
short major;
short minor;
short nlink;
uint size;
uint addrs[NDIRECT+1];
};
// table mapping major device number to
// device functions
struct devsw {
int (*read)(struct inode*, char*, int);
int (*write)(struct inode*, char*, int);
};
extern struct devsw devsw[];
#define CONSOLE 1
forktest.c 0 → 100644
View file @ a4c94803
// Test that fork fails gracefully.
// Tiny executable so that the limit can be filling the proc table.
#include "types.h"
#include "stat.h"
#include "user.h"
#define N 1000
void
printf(int fd, const char *s, ...)
{
write(fd, s, strlen(s));
}
void
forktest(void)
{
int n, pid;
printf(1, "fork test\n");
for(n=0; n<N; n++){
pid = fork();
if(pid < 0)
break;
if(pid == 0)
exit();
}
if(n == N){
printf(1, "fork claimed to work N times!\n", N);
exit();
}
for(; n > 0; n--){
if(wait() < 0){
printf(1, "wait stopped early\n");
exit();
}
}
if(wait() != -1){
printf(1, "wait got too many\n");
exit();
}
printf(1, "fork test OK\n");
}
int
main(void)
{
forktest();
exit();
}
fs.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
fs.h 0 → 100644
View file @ a4c94803
// On-disk file system format.
// Both the kernel and user programs use this header file.
#define ROOTINO 1 // root i-number
#define BSIZE 512 // block size
// Disk layout:
// [ boot block | super block | log | inode blocks |
// free bit map | data blocks]
//
// mkfs computes the super block and builds an initial file system. The
// super block describes the disk layout:
struct superblock {
uint size; // Size of file system image (blocks)
uint nblocks; // Number of data blocks
uint ninodes; // Number of inodes.
uint nlog; // Number of log blocks
uint logstart; // Block number of first log block
uint inodestart; // Block number of first inode block
uint bmapstart; // Block number of first free map block
};
#define NDIRECT 12
#define NINDIRECT (BSIZE / sizeof(uint))
#define MAXFILE (NDIRECT + NINDIRECT)
// On-disk inode structure
struct dinode {
short type; // File type
short major; // Major device number (T_DEV only)
short minor; // Minor device number (T_DEV only)
short nlink; // Number of links to inode in file system
uint size; // Size of file (bytes)
uint addrs[NDIRECT+1]; // Data block addresses
};
// Inodes per block.
#define IPB (BSIZE / sizeof(struct dinode))
// Block containing inode i
#define IBLOCK(i, sb) ((i) / IPB + sb.inodestart)
// Bitmap bits per block
#define BPB (BSIZE*8)
// Block of free map containing bit for block b
#define BBLOCK(b, sb) (b/BPB + sb.bmapstart)
// Directory is a file containing a sequence of dirent structures.
#define DIRSIZ 14
struct dirent {
ushort inum;
char name[DIRSIZ];
};
gdbutil 0 → 100644
View file @ a4c94803
# -*- gdb-script -*-
# Utility functions to pretty-print x86 segment/interrupt descriptors.
# To load this file, run "source gdbutil" in gdb.
# printdesc and printdescs are the main entry points.
# IA32 2007, Volume 3A, Table 3-2
set $STS_T16A = 0x1
set $STS_LDT = 0x2
set $STS_T16B = 0x3
set $STS_CG16 = 0x4
set $STS_TG = 0x5
set $STS_IG16 = 0x6
set $STS_TG16 = 0x7
set $STS_T32A = 0x9
set $STS_T32B = 0xB
set $STS_CG32 = 0xC
set $STS_IG32 = 0xE
set $STS_TG32 = 0xF
define outputsts
while 1
if $arg0 == $STS_T16A
echo STS_T16A
loop_break
end
if $arg0 == $STS_LDT
echo STS_LDT\
loop_break
end
if $arg0 == $STS_T16B
echo STS_T16B
loop_break
end
if $arg0 == $STS_CG16
echo STS_CG16
loop_break
end
if $arg0 == $STS_TG
echo STS_TG\ \
loop_break
end
if $arg0 == $STS_IG16
echo STS_IG16
loop_break
end
if $arg0 == $STS_TG16
echo STS_TG16
loop_break
end
if $arg0 == $STS_T32A
echo STS_T32A
loop_break
end
if $arg0 == $STS_T32B
echo STS_T32B
loop_break
end
if $arg0 == $STS_CG32
echo STS_CG32
loop_break
end
if $arg0 == $STS_IG32
echo STS_IG32
loop_break
end
if $arg0 == $STS_TG32
echo STS_TG32
loop_break
end
echo Reserved
loop_break
end
end
# IA32 2007, Volume 3A, Table 3-1
set $STA_X = 0x8
set $STA_E = 0x4
set $STA_C = 0x4
set $STA_W = 0x2
set $STA_R = 0x2
set $STA_A = 0x1
define outputsta
if $arg0 & $STA_X
# Code segment
echo code
if $arg0 & $STA_C
echo |STA_C
end
if $arg0 & $STA_R
echo |STA_R
end
else
# Data segment
echo data
if $arg0 & $STA_E
echo |STA_E
end
if $arg0 & $STA_W
echo |STA_W
end
end
if $arg0 & $STA_A
echo |STA_A
else
printf " "
end
end
# xv6-specific
set $SEG_KCODE = 1
set $SEG_KDATA = 2
set $SEG_KCPU = 3
set $SEG_UCODE = 4
set $SEG_UDATA = 5
set $SEG_TSS = 6
define outputcs
if ($arg0 & 4) == 0
if $arg0 >> 3 == $SEG_KCODE
printf "SEG_KCODE<<3"
end
if $arg0 >> 3 == $SEG_KDATA
printf "SEG_KDATA<<3"
end
if $arg0 >> 3 == $SEG_KCPU
printf "SEG_KCPU<<3"
end
if $arg0 >> 3 == $SEG_UCODE
printf "SEG_UCODE<<3"
end
if $arg0 >> 3 == $SEG_UDATA
printf "SEG_UDATA<<3"
end
if $arg0 >> 3 == $SEG_TSS
printf "SEG_TSS<<3"
end
if ($arg0 >> 3 < 1) + ($arg0 >> 3 > 6)
printf "GDT[%d]", $arg0 >> 3
end
else
printf "LDT[%d]", $arg0 >> 3
end
if ($arg0 & 3) > 0
printf "|"
outputdpl ($arg0&3)
end
end
define outputdpl
if $arg0 == 0
printf "DPL_KERN"
else
if $arg0 == 3
printf "DPL_USER"
else
printf "DPL%d", $arg0
end
end
end
define printdesc
if $argc != 1
echo Usage: printdesc expr
else
_printdesc ((uint*)&($arg0))[0] ((uint*)&($arg0))[1]
printf "\n"
end
end
document printdesc
Print an x86 segment or gate descriptor.
printdesc EXPR
EXPR must evaluate to a descriptor value. It can be of any C type.
end
define _printdesc
_printdesc1 $arg0 $arg1 ($arg1>>15&1) ($arg1>>13&3) ($arg1>>12&1) ($arg1>>8&15)
end
define _printdesc1
# 2:P 3:DPL 4:S 5:Type
if $arg2 == 0
printf "P = 0 (Not present)"
else
printf "type = "
if $arg4 == 0
# System segment
outputsts $arg5
printf " (0x%x) ", $arg5
_printsysdesc $arg0 $arg1 $arg5
else
# Code/data segment
outputsta $arg5
printf " "
_printsegdesc $arg0 $arg1
end
printf " DPL = "
outputdpl $arg3
printf " (%d)", $arg3
end
end
define _printsysdesc
# 2:Type
# GDB's || is buggy
if ($arg2 == $STS_TG) + (($arg2&7) == $STS_IG16) + (($arg2&7) == $STS_TG16)
# Gate descriptor
_printgate $arg2 ($arg0>>16) ($arg0&0xFFFF) ($arg1>>16)
else
# System segment descriptor
_printsegdesc $arg0 $arg1
end
end
define _printgate
# IA32 2007, Voume 3A, Figure 5-2
# 0:Type 1:CS 2:Offset 15..0 3:Offset 31..16
printf "CS = "
outputcs $arg1
printf " (%d)", $arg1
if (($arg0&7) == $STS_IG16) + (($arg0&7) == $STS_TG16)
printf " Offset = "
output/a $arg3 << 16 | $arg2
end
end
define _printsegdesc
# IA32 20007, Volume 3A, Figure 3-8 and Figure 4-1
_printsegdesc1 ($arg0>>16) ($arg1&0xFF) ($arg1>>24) ($arg0&0xFFFF) ($arg1>>16&15) ($arg1>>23&1)
if ($arg1>>12&1) == 1
printf " AVL = %d", $arg1>>20&1
if ($arg1>>11&1) == 0
# Data segment
if ($arg1>>22&1) == 0
printf " B = small (0) "
else
printf " B = big (1) "
end
else
# Code segment
printf " D = "
if ($arg1>>22&1) == 0
printf "16-bit (0)"
else
printf "32-bit (1)"
end
end
end
end
define _printsegdesc1
# 0:Base 0..15 1:Base 16..23 2:Base 24..32 3:Limit 0..15 4:Limit 16..19 5:G
printf "base = 0x%08x", $arg0 | ($arg1<<16) | ($arg2<<24)
printf " limit = 0x"
if $arg5 == 0
printf "%08x", $arg3 | ($arg4<<16)
else
printf "%08x", (($arg3 | ($arg4<<16)) << 12) | 0xFFF
end
end
define printdescs
if $argc < 1 || $argc > 2
echo Usage: printdescs expr [count]
else
if $argc == 1
_printdescs ($arg0) (sizeof($arg0)/sizeof(($arg0)[0]))
else
_printdescs ($arg0) ($arg1)
end
end
end
document printdescs
Print an array of x86 segment or gate descriptors.
printdescs EXPR [COUNT]
EXPR must evaluate to an array of descriptors.
end
define _printdescs
set $i = 0
while $i < $arg1
printf "[%d] ", $i
printdesc $arg0[$i]
set $i = $i + 1
end
end
grep.c 0 → 100644
View file @ a4c94803
// Simple grep. Only supports ^ . * $ operators.
#include "types.h"
#include "stat.h"
#include "user.h"
char buf[1024];
int match(char*, char*);
void
grep(char *pattern, int fd)
{
int n, m;
char *p, *q;
m = 0;
while((n = read(fd, buf+m, sizeof(buf)-m-1)) > 0){
m += n;
buf[m] = '\0';
p = buf;
while((q = strchr(p, '\n')) != 0){
*q = 0;
if(match(pattern, p)){
*q = '\n';
write(1, p, q+1 - p);
}
p = q+1;
}
if(p == buf)
m = 0;
if(m > 0){
m -= p - buf;
memmove(buf, p, m);
}
}
}
int
main(int argc, char *argv[])
{
int fd, i;
char *pattern;
if(argc <= 1){
printf(2, "usage: grep pattern [file ...]\n");
exit();
}
pattern = argv[1];
if(argc <= 2){
grep(pattern, 0);
exit();
}
for(i = 2; i < argc; i++){
if((fd = open(argv[i], 0)) < 0){
printf(1, "grep: cannot open %s\n", argv[i]);
exit();
}
grep(pattern, fd);
close(fd);
}
exit();
}
// Regexp matcher from Kernighan & Pike,
// The Practice of Programming, Chapter 9.
int matchhere(char*, char*);
int matchstar(int, char*, char*);
int
match(char *re, char *text)
{
if(re[0] == '^')
return matchhere(re+1, text);
do{ // must look at empty string
if(matchhere(re, text))
return 1;
}while(*text++ != '\0');
return 0;
}
// matchhere: search for re at beginning of text
int matchhere(char *re, char *text)
{
if(re[0] == '\0')
return 1;
if(re[1] == '*')
return matchstar(re[0], re+2, text);
if(re[0] == '$' && re[1] == '\0')
return *text == '\0';
if(*text!='\0' && (re[0]=='.' || re[0]==*text))
return matchhere(re+1, text+1);
return 0;
}
// matchstar: search for c*re at beginning of text
int matchstar(int c, char *re, char *text)
{
do{ // a * matches zero or more instances
if(matchhere(re, text))
return 1;
}while(*text!='\0' && (*text++==c || c=='.'));
return 0;
}
ide.c 0 → 100644
View file @ a4c94803
// Simple PIO-based (non-DMA) IDE driver code.
#include "types.h"
#include "defs.h"
#include "param.h"
#include "memlayout.h"
#include "mmu.h"
#include "proc.h"
#include "x86.h"
#include "traps.h"
#include "spinlock.h"
#include "sleeplock.h"
#include "fs.h"
#include "buf.h"
#define SECTOR_SIZE 512
#define IDE_BSY 0x80
#define IDE_DRDY 0x40
#define IDE_DF 0x20
#define IDE_ERR 0x01
#define IDE_CMD_READ 0x20
#define IDE_CMD_WRITE 0x30
#define IDE_CMD_RDMUL 0xc4
#define IDE_CMD_WRMUL 0xc5
// idequeue points to the buf now being read/written to the disk.
// idequeue->qnext points to the next buf to be processed.
// You must hold idelock while manipulating queue.
static struct spinlock idelock;
static struct buf *idequeue;
static int havedisk1;
static void idestart(struct buf*);
// Wait for IDE disk to become ready.
static int
idewait(int checkerr)
{
int r;
while(((r = inb(0x1f7)) & (IDE_BSY|IDE_DRDY)) != IDE_DRDY)
;
if(checkerr && (r & (IDE_DF|IDE_ERR)) != 0)
return -1;
return 0;
}
void
ideinit(void)
{
int i;
initlock(&idelock, "ide");
ioapicenable(IRQ_IDE, ncpu - 1);
idewait(0);
// Check if disk 1 is present
outb(0x1f6, 0xe0 | (1<<4));
for(i=0; i<1000; i++){
if(inb(0x1f7) != 0){
havedisk1 = 1;
break;
}
}
// Switch back to disk 0.
outb(0x1f6, 0xe0 | (0<<4));
}
// Start the request for b. Caller must hold idelock.
static void
idestart(struct buf *b)
{
if(b == 0)
panic("idestart");
if(b->blockno >= FSSIZE)
panic("incorrect blockno");
int sector_per_block = BSIZE/SECTOR_SIZE;
int sector = b->blockno * sector_per_block;
int read_cmd = (sector_per_block == 1) ? IDE_CMD_READ : IDE_CMD_RDMUL;
int write_cmd = (sector_per_block == 1) ? IDE_CMD_WRITE : IDE_CMD_WRMUL;
if (sector_per_block > 7) panic("idestart");
idewait(0);
outb(0x3f6, 0); // generate interrupt
outb(0x1f2, sector_per_block); // number of sectors
outb(0x1f3, sector & 0xff);
outb(0x1f4, (sector >> 8) & 0xff);
outb(0x1f5, (sector >> 16) & 0xff);
outb(0x1f6, 0xe0 | ((b->dev&1)<<4) | ((sector>>24)&0x0f));
if(b->flags & B_DIRTY){
outb(0x1f7, write_cmd);
outsl(0x1f0, b->data, BSIZE/4);
} else {
outb(0x1f7, read_cmd);
}
}
// Interrupt handler.
void
ideintr(void)
{
struct buf *b;
// First queued buffer is the active request.
acquire(&idelock);
if((b = idequeue) == 0){
release(&idelock);
return;
}
idequeue = b->qnext;
// Read data if needed.
if(!(b->flags & B_DIRTY) && idewait(1) >= 0)
insl(0x1f0, b->data, BSIZE/4);
// Wake process waiting for this buf.
b->flags |= B_VALID;
b->flags &= ~B_DIRTY;
wakeup(b);
// Start disk on next buf in queue.
if(idequeue != 0)
idestart(idequeue);
release(&idelock);
}
//PAGEBREAK!
// Sync buf with disk.
// If B_DIRTY is set, write buf to disk, clear B_DIRTY, set B_VALID.
// Else if B_VALID is not set, read buf from disk, set B_VALID.
void
iderw(struct buf *b)
{
struct buf **pp;
if(!holdingsleep(&b->lock))
panic("iderw: buf not locked");
if((b->flags & (B_VALID|B_DIRTY)) == B_VALID)
panic("iderw: nothing to do");
if(b->dev != 0 && !havedisk1)
panic("iderw: ide disk 1 not present");
acquire(&idelock); //DOC:acquire-lock
// Append b to idequeue.
b->qnext = 0;
for(pp=&idequeue; *pp; pp=&(*pp)->qnext) //DOC:insert-queue
;
*pp = b;
// Start disk if necessary.
if(idequeue == b)
idestart(b);
// Wait for request to finish.
while((b->flags & (B_VALID|B_DIRTY)) != B_VALID){
sleep(b, &idelock);
}
release(&idelock);
}
init.c 0 → 100644
View file @ a4c94803
// init: The initial user-level program
#include "types.h"
#include "stat.h"
#include "user.h"
#include "fcntl.h"
char *argv[] = { "sh", 0 };
int
main(void)
{
int pid, wpid;
if(open("console", O_RDWR) < 0){
mknod("console", 1, 1);
open("console", O_RDWR);
}
dup(0); // stdout
dup(0); // stderr
for(;;){
printf(1, "init: starting sh\n");
pid = fork();
if(pid < 0){
printf(1, "init: fork failed\n");
exit();
}
if(pid == 0){
exec("sh", argv);
printf(1, "init: exec sh failed\n");
exit();
}
while((wpid=wait()) >= 0 && wpid != pid)
printf(1, "zombie!\n");
}
}
initcode.S 0 → 100644
View file @ a4c94803
# Initial process execs /init.
# This code runs in user space.
#include "syscall.h"
#include "traps.h"
# exec(init, argv)
.globl start
start:
pushl $argv
pushl $init
pushl $0 // where caller pc would be
movl $SYS_exec, %eax
int $T_SYSCALL
# for(;;) exit();
exit:
movl $SYS_exit, %eax
int $T_SYSCALL
jmp exit
# char init[] = "/init\0";
init:
.string "/init\0"
# char *argv[] = { init, 0 };
.p2align 2
argv:
.long init
.long 0
ioapic.c 0 → 100644
View file @ a4c94803
// The I/O APIC manages hardware interrupts for an SMP system.
// http://www.intel.com/design/chipsets/datashts/29056601.pdf
// See also picirq.c.
#include "types.h"
#include "defs.h"
#include "traps.h"
#define IOAPIC 0xFEC00000 // Default physical address of IO APIC
#define REG_ID 0x00 // Register index: ID
#define REG_VER 0x01 // Register index: version
#define REG_TABLE 0x10 // Redirection table base
// The redirection table starts at REG_TABLE and uses
// two registers to configure each interrupt.
// The first (low) register in a pair contains configuration bits.
// The second (high) register contains a bitmask telling which
// CPUs can serve that interrupt.
#define INT_DISABLED 0x00010000 // Interrupt disabled
#define INT_LEVEL 0x00008000 // Level-triggered (vs edge-)
#define INT_ACTIVELOW 0x00002000 // Active low (vs high)
#define INT_LOGICAL 0x00000800 // Destination is CPU id (vs APIC ID)
volatile struct ioapic *ioapic;
// IO APIC MMIO structure: write reg, then read or write data.
struct ioapic {
uint reg;
uint pad[3];
uint data;
};
static uint
ioapicread(int reg)
{
ioapic->reg = reg;
return ioapic->data;
}
static void
ioapicwrite(int reg, uint data)
{
ioapic->reg = reg;
ioapic->data = data;
}
void
ioapicinit(void)
{
int i, id, maxintr;
ioapic = (volatile struct ioapic*)IOAPIC;
maxintr = (ioapicread(REG_VER) >> 16) & 0xFF;
id = ioapicread(REG_ID) >> 24;
if(id != ioapicid)
cprintf("ioapicinit: id isn't equal to ioapicid; not a MP\n");
// Mark all interrupts edge-triggered, active high, disabled,
// and not routed to any CPUs.
for(i = 0; i <= maxintr; i++){
ioapicwrite(REG_TABLE+2*i, INT_DISABLED | (T_IRQ0 + i));
ioapicwrite(REG_TABLE+2*i+1, 0);
}
}
void
ioapicenable(int irq, int cpunum)
{
// Mark interrupt edge-triggered, active high,
// enabled, and routed to the given cpunum,
// which happens to be that cpu's APIC ID.
ioapicwrite(REG_TABLE+2*irq, T_IRQ0 + irq);
ioapicwrite(REG_TABLE+2*irq+1, cpunum << 24);
}
kalloc.c 0 → 100644
View file @ a4c94803
// Physical memory allocator, intended to allocate
// memory for user processes, kernel stacks, page table pages,
// and pipe buffers. Allocates 4096-byte pages.
#include "types.h"
#include "defs.h"
#include "param.h"
#include "memlayout.h"
#include "mmu.h"
#include "spinlock.h"
void freerange(void *vstart, void *vend);
extern char end[]; // first address after kernel loaded from ELF file
// defined by the kernel linker script in kernel.ld
struct run {
struct run *next;
};
struct {
struct spinlock lock;
int use_lock;
struct run *freelist;
} kmem;
// Initialization happens in two phases.
// 1. main() calls kinit1() while still using entrypgdir to place just
// the pages mapped by entrypgdir on free list.
// 2. main() calls kinit2() with the rest of the physical pages
// after installing a full page table that maps them on all cores.
void
kinit1(void *vstart, void *vend)
{
initlock(&kmem.lock, "kmem");
kmem.use_lock = 0;
freerange(vstart, vend);
}
void
kinit2(void *vstart, void *vend)
{
freerange(vstart, vend);
kmem.use_lock = 1;
}
void
freerange(void *vstart, void *vend)
{
char *p;
p = (char*)PGROUNDUP((uint)vstart);
for(; p + PGSIZE <= (char*)vend; p += PGSIZE)
kfree(p);
}
//PAGEBREAK: 21
// Free the page of physical memory pointed at by v,
// which normally should have been returned by a
// call to kalloc(). (The exception is when
// initializing the allocator; see kinit above.)
void
kfree(char *v)
{
struct run *r;
if((uint)v % PGSIZE || v < end || V2P(v) >= PHYSTOP)
panic("kfree");
// Fill with junk to catch dangling refs.
memset(v, 1, PGSIZE);
if(kmem.use_lock)
acquire(&kmem.lock);
r = (struct run*)v;
r->next = kmem.freelist;
kmem.freelist = r;
if(kmem.use_lock)
release(&kmem.lock);
}
// Allocate one 4096-byte page of physical memory.
// Returns a pointer that the kernel can use.
// Returns 0 if the memory cannot be allocated.
char*
kalloc(void)
{
struct run *r;
if(kmem.use_lock)
acquire(&kmem.lock);
r = kmem.freelist;
if(r)
kmem.freelist = r->next;
if(kmem.use_lock)
release(&kmem.lock);
return (char*)r;
}
kbd.c 0 → 100644
View file @ a4c94803
#include "types.h"
#include "x86.h"
#include "defs.h"
#include "kbd.h"
int
kbdgetc(void)
{
static uint shift;
static uchar *charcode[4] = {
normalmap, shiftmap, ctlmap, ctlmap
};
uint st, data, c;
st = inb(KBSTATP);
if((st & KBS_DIB) == 0)
return -1;
data = inb(KBDATAP);
if(data == 0xE0){
shift |= E0ESC;
return 0;
} else if(data & 0x80){
// Key released
data = (shift & E0ESC ? data : data & 0x7F);
shift &= ~(shiftcode[data] | E0ESC);
return 0;
} else if(shift & E0ESC){
// Last character was an E0 escape; or with 0x80
data |= 0x80;
shift &= ~E0ESC;
}
shift |= shiftcode[data];
shift ^= togglecode[data];
c = charcode[shift & (CTL | SHIFT)][data];
if(shift & CAPSLOCK){
if('a' <= c && c <= 'z')
c += 'A' - 'a';
else if('A' <= c && c <= 'Z')
c += 'a' - 'A';
}
return c;
}
void
kbdintr(void)
{
consoleintr(kbdgetc);
}
kbd.h 0 → 100644
View file @ a4c94803
// PC keyboard interface constants
#define KBSTATP 0x64 // kbd controller status port(I)
#define KBS_DIB 0x01 // kbd data in buffer
#define KBDATAP 0x60 // kbd data port(I)
#define NO 0
#define SHIFT (1<<0)
#define CTL (1<<1)
#define ALT (1<<2)
#define CAPSLOCK (1<<3)
#define NUMLOCK (1<<4)
#define SCROLLLOCK (1<<5)
#define E0ESC (1<<6)
// Special keycodes
#define KEY_HOME 0xE0
#define KEY_END 0xE1
#define KEY_UP 0xE2
#define KEY_DN 0xE3
#define KEY_LF 0xE4
#define KEY_RT 0xE5
#define KEY_PGUP 0xE6
#define KEY_PGDN 0xE7
#define KEY_INS 0xE8
#define KEY_DEL 0xE9
// C('A') == Control-A
#define C(x) (x - '@')
static uchar shiftcode[256] =
{
[0x1D] CTL,
[0x2A] SHIFT,
[0x36] SHIFT,
[0x38] ALT,
[0x9D] CTL,
[0xB8] ALT
};
static uchar togglecode[256] =
{
[0x3A] CAPSLOCK,
[0x45] NUMLOCK,
[0x46] SCROLLLOCK
};
static uchar normalmap[256] =
{
NO, 0x1B, '1', '2', '3', '4', '5', '6', // 0x00
'7', '8', '9', '0', '-', '=', '\b', '\t',
'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', // 0x10
'o', 'p', '[', ']', '\n', NO, 'a', 's',
'd', 'f', 'g', 'h', 'j', 'k', 'l', ';', // 0x20
'\'', '`', NO, '\\', 'z', 'x', 'c', 'v',
'b', 'n', 'm', ',', '.', '/', NO, '*', // 0x30
NO, ' ', NO, NO, NO, NO, NO, NO,
NO, NO, NO, NO, NO, NO, NO, '7', // 0x40
'8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', NO, NO, NO, NO, // 0x50
[0x9C] '\n', // KP_Enter
[0xB5] '/', // KP_Div
[0xC8] KEY_UP, [0xD0] KEY_DN,
[0xC9] KEY_PGUP, [0xD1] KEY_PGDN,
[0xCB] KEY_LF, [0xCD] KEY_RT,
[0x97] KEY_HOME, [0xCF] KEY_END,
[0xD2] KEY_INS, [0xD3] KEY_DEL
};
static uchar shiftmap[256] =
{
NO, 033, '!', '@', '#', '$', '%', '^', // 0x00
'&', '*', '(', ')', '_', '+', '\b', '\t',
'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', // 0x10
'O', 'P', '{', '}', '\n', NO, 'A', 'S',
'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', // 0x20
'"', '~', NO, '|', 'Z', 'X', 'C', 'V',
'B', 'N', 'M', '<', '>', '?', NO, '*', // 0x30
NO, ' ', NO, NO, NO, NO, NO, NO,
NO, NO, NO, NO, NO, NO, NO, '7', // 0x40
'8', '9', '-', '4', '5', '6', '+', '1',
'2', '3', '0', '.', NO, NO, NO, NO, // 0x50
[0x9C] '\n', // KP_Enter
[0xB5] '/', // KP_Div
[0xC8] KEY_UP, [0xD0] KEY_DN,
[0xC9] KEY_PGUP, [0xD1] KEY_PGDN,
[0xCB] KEY_LF, [0xCD] KEY_RT,
[0x97] KEY_HOME, [0xCF] KEY_END,
[0xD2] KEY_INS, [0xD3] KEY_DEL
};
static uchar ctlmap[256] =
{
NO, NO, NO, NO, NO, NO, NO, NO,
NO, NO, NO, NO, NO, NO, NO, NO,
C('Q'), C('W'), C('E'), C('R'), C('T'), C('Y'), C('U'), C('I'),
C('O'), C('P'), NO, NO, '\r', NO, C('A'), C('S'),
C('D'), C('F'), C('G'), C('H'), C('J'), C('K'), C('L'), NO,
NO, NO, NO, C('\\'), C('Z'), C('X'), C('C'), C('V'),
C('B'), C('N'), C('M'), NO, NO, C('/'), NO, NO,
[0x9C] '\r', // KP_Enter
[0xB5] C('/'), // KP_Div
[0xC8] KEY_UP, [0xD0] KEY_DN,
[0xC9] KEY_PGUP, [0xD1] KEY_PGDN,
[0xCB] KEY_LF, [0xCD] KEY_RT,
[0x97] KEY_HOME, [0xCF] KEY_END,
[0xD2] KEY_INS, [0xD3] KEY_DEL
};
kernel.ld 0 → 100644
View file @ a4c94803
/* Simple linker script for the JOS kernel.
See the GNU ld 'info' manual ("info ld") to learn the syntax. */
OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
OUTPUT_ARCH(i386)
ENTRY(_start)
SECTIONS
{
/* Link the kernel at this address: "." means the current address */
/* Must be equal to KERNLINK */
. = 0x80100000;
.text : AT(0x100000) {
*(.text .stub .text.* .gnu.linkonce.t.*)
}
PROVIDE(etext = .); /* Define the 'etext' symbol to this value */
.rodata : {
*(.rodata .rodata.* .gnu.linkonce.r.*)
}
/* Include debugging information in kernel memory */
.stab : {
PROVIDE(__STAB_BEGIN__ = .);
*(.stab);
PROVIDE(__STAB_END__ = .);
BYTE(0) /* Force the linker to allocate space
for this section */
}
.stabstr : {
PROVIDE(__STABSTR_BEGIN__ = .);
*(.stabstr);
PROVIDE(__STABSTR_END__ = .);
BYTE(0) /* Force the linker to allocate space
for this section */
}
/* Adjust the address for the data segment to the next page */
. = ALIGN(0x1000);
/* Conventionally, Unix linkers provide pseudo-symbols
* etext, edata, and end, at the end of the text, data, and bss.
* For the kernel mapping, we need the address at the beginning
* of the data section, but that's not one of the conventional
* symbols, because the convention started before there was a
* read-only rodata section between text and data. */
PROVIDE(data = .);
/* The data segment */
.data : {
*(.data)
}
PROVIDE(edata = .);
.bss : {
*(.bss)
}
PROVIDE(end = .);
/DISCARD/ : {
*(.eh_frame .note.GNU-stack)
}
}
kill.c 0 → 100644
View file @ a4c94803
#include "types.h"
#include "stat.h"
#include "user.h"
int
main(int argc, char **argv)
{
int i;
if(argc < 2){
printf(2, "usage: kill pid...\n");
exit();
}
for(i=1; i<argc; i++)
kill(atoi(argv[i]));
exit();
}
lapic.c 0 → 100644
View file @ a4c94803
// The local APIC manages internal (non-I/O) interrupts.
// See Chapter 8 & Appendix C of Intel processor manual volume 3.
#include "param.h"
#include "types.h"
#include "defs.h"
#include "date.h"
#include "memlayout.h"
#include "traps.h"
#include "mmu.h"
#include "x86.h"
// Local APIC registers, divided by 4 for use as uint[] indices.
#define ID (0x0020/4) // ID
#define VER (0x0030/4) // Version
#define TPR (0x0080/4) // Task Priority
#define EOI (0x00B0/4) // EOI
#define SVR (0x00F0/4) // Spurious Interrupt Vector
#define ENABLE 0x00000100 // Unit Enable
#define ESR (0x0280/4) // Error Status
#define ICRLO (0x0300/4) // Interrupt Command
#define INIT 0x00000500 // INIT/RESET
#define STARTUP 0x00000600 // Startup IPI
#define DELIVS 0x00001000 // Delivery status
#define ASSERT 0x00004000 // Assert interrupt (vs deassert)
#define DEASSERT 0x00000000
#define LEVEL 0x00008000 // Level triggered
#define BCAST 0x00080000 // Send to all APICs, including self.
#define BUSY 0x00001000
#define FIXED 0x00000000
#define ICRHI (0x0310/4) // Interrupt Command [63:32]
#define TIMER (0x0320/4) // Local Vector Table 0 (TIMER)
#define X1 0x0000000B // divide counts by 1
#define PERIODIC 0x00020000 // Periodic
#define PCINT (0x0340/4) // Performance Counter LVT
#define LINT0 (0x0350/4) // Local Vector Table 1 (LINT0)
#define LINT1 (0x0360/4) // Local Vector Table 2 (LINT1)
#define ERROR (0x0370/4) // Local Vector Table 3 (ERROR)
#define MASKED 0x00010000 // Interrupt masked
#define TICR (0x0380/4) // Timer Initial Count
#define TCCR (0x0390/4) // Timer Current Count
#define TDCR (0x03E0/4) // Timer Divide Configuration
volatile uint *lapic; // Initialized in mp.c
//PAGEBREAK!
static void
lapicw(int index, int value)
{
lapic[index] = value;
lapic[ID]; // wait for write to finish, by reading
}
void
lapicinit(void)
{
if(!lapic)
return;
// Enable local APIC; set spurious interrupt vector.
lapicw(SVR, ENABLE | (T_IRQ0 + IRQ_SPURIOUS));
// The timer repeatedly counts down at bus frequency
// from lapic[TICR] and then issues an interrupt.
// If xv6 cared more about precise timekeeping,
// TICR would be calibrated using an external time source.
lapicw(TDCR, X1);
lapicw(TIMER, PERIODIC | (T_IRQ0 + IRQ_TIMER));
lapicw(TICR, 10000000);
// Disable logical interrupt lines.
lapicw(LINT0, MASKED);
lapicw(LINT1, MASKED);
// Disable performance counter overflow interrupts
// on machines that provide that interrupt entry.
if(((lapic[VER]>>16) & 0xFF) >= 4)
lapicw(PCINT, MASKED);
// Map error interrupt to IRQ_ERROR.
lapicw(ERROR, T_IRQ0 + IRQ_ERROR);
// Clear error status register (requires back-to-back writes).
lapicw(ESR, 0);
lapicw(ESR, 0);
// Ack any outstanding interrupts.
lapicw(EOI, 0);
// Send an Init Level De-Assert to synchronise arbitration ID's.
lapicw(ICRHI, 0);
lapicw(ICRLO, BCAST | INIT | LEVEL);
while(lapic[ICRLO] & DELIVS)
;
// Enable interrupts on the APIC (but not on the processor).
lapicw(TPR, 0);
}
int
lapicid(void)
{
if (!lapic)
return 0;
return lapic[ID] >> 24;
}
// Acknowledge interrupt.
void
lapiceoi(void)
{
if(lapic)
lapicw(EOI, 0);
}
// Spin for a given number of microseconds.
// On real hardware would want to tune this dynamically.
void
microdelay(int us)
{
}
#define CMOS_PORT 0x70
#define CMOS_RETURN 0x71
// Start additional processor running entry code at addr.
// See Appendix B of MultiProcessor Specification.
void
lapicstartap(uchar apicid, uint addr)
{
int i;
ushort *wrv;
// "The BSP must initialize CMOS shutdown code to 0AH
// and the warm reset vector (DWORD based at 40:67) to point at
// the AP startup code prior to the [universal startup algorithm]."
outb(CMOS_PORT, 0xF); // offset 0xF is shutdown code
outb(CMOS_PORT+1, 0x0A);
wrv = (ushort*)P2V((0x40<<4 | 0x67)); // Warm reset vector
wrv[0] = 0;
wrv[1] = addr >> 4;
// "Universal startup algorithm."
// Send INIT (level-triggered) interrupt to reset other CPU.
lapicw(ICRHI, apicid<<24);
lapicw(ICRLO, INIT | LEVEL | ASSERT);
microdelay(200);
lapicw(ICRLO, INIT | LEVEL);
microdelay(100); // should be 10ms, but too slow in Bochs!
// Send startup IPI (twice!) to enter code.
// Regular hardware is supposed to only accept a STARTUP
// when it is in the halted state due to an INIT. So the second
// should be ignored, but it is part of the official Intel algorithm.
// Bochs complains about the second one. Too bad for Bochs.
for(i = 0; i < 2; i++){
lapicw(ICRHI, apicid<<24);
lapicw(ICRLO, STARTUP | (addr>>12));
microdelay(200);
}
}
#define CMOS_STATA 0x0a
#define CMOS_STATB 0x0b
#define CMOS_UIP (1 << 7) // RTC update in progress
#define SECS 0x00
#define MINS 0x02
#define HOURS 0x04
#define DAY 0x07
#define MONTH 0x08
#define YEAR 0x09
static uint
cmos_read(uint reg)
{
outb(CMOS_PORT, reg);
microdelay(200);
return inb(CMOS_RETURN);
}
static void
fill_rtcdate(struct rtcdate *r)
{
r->second = cmos_read(SECS);
r->minute = cmos_read(MINS);
r->hour = cmos_read(HOURS);
r->day = cmos_read(DAY);
r->month = cmos_read(MONTH);
r->year = cmos_read(YEAR);
}
// qemu seems to use 24-hour GWT and the values are BCD encoded
void
cmostime(struct rtcdate *r)
{
struct rtcdate t1, t2;
int sb, bcd;
sb = cmos_read(CMOS_STATB);
bcd = (sb & (1 << 2)) == 0;
// make sure CMOS doesn't modify time while we read it
for(;;) {
fill_rtcdate(&t1);
if(cmos_read(CMOS_STATA) & CMOS_UIP)
continue;
fill_rtcdate(&t2);
if(memcmp(&t1, &t2, sizeof(t1)) == 0)
break;
}
// convert
if(bcd) {
#define CONV(x) (t1.x = ((t1.x >> 4) * 10) + (t1.x & 0xf))
CONV(second);
CONV(minute);
CONV(hour );
CONV(day );
CONV(month );
CONV(year );
#undef CONV
}
*r = t1;
r->year += 2000;
}
ln.c 0 → 100644
View file @ a4c94803
#include "types.h"
#include "stat.h"
#include "user.h"
int
main(int argc, char *argv[])
{
if(argc != 3){
printf(2, "Usage: ln old new\n");
exit();
}
if(link(argv[1], argv[2]) < 0)
printf(2, "link %s %s: failed\n", argv[1], argv[2]);
exit();
}
log.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
ls.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
main.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
memide.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
memlayout.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
mkdir.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
mkfs.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
mmu.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
mp.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
mp.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
param.h 0 → 100644
View file @ a4c94803
#define NPROC 64 // maximum number of processes
#define KSTACKSIZE 4096 // size of per-process kernel stack
#define NCPU 8 // maximum number of CPUs
#define NOFILE 16 // open files per process
#define NFILE 100 // open files per system
#define NINODE 50 // maximum number of active i-nodes
#define NDEV 10 // maximum major device number
#define ROOTDEV 1 // device number of file system root disk
#define MAXARG 32 // max exec arguments
#define MAXOPBLOCKS 10 // max # of blocks any FS op writes
#define LOGSIZE (MAXOPBLOCKS*3) // max data blocks in on-disk log
#define NBUF (MAXOPBLOCKS*3) // size of disk block cache
#define FSSIZE 1000 // size of file system in blocks
picirq.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
pipe.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
pr.pl 0 → 100755
View file @ a4c94803
This diff is collapsed.
printf.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
printpcs 0 → 100755
View file @ a4c94803
This diff is collapsed.
proc.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
proc.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
rm.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
runoff 0 → 100755
View file @ a4c94803
This diff is collapsed.
runoff.list 0 → 100644
View file @ a4c94803
This diff is collapsed.
runoff.spec 0 → 100644
View file @ a4c94803
This diff is collapsed.
runoff1 0 → 100755
View file @ a4c94803
This diff is collapsed.
sh.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
show1 0 → 100755
View file @ a4c94803
This diff is collapsed.
sign.pl 0 → 100755
View file @ a4c94803
This diff is collapsed.
sleep1.p 0 → 100644
View file @ a4c94803
This diff is collapsed.
sleeplock.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
sleeplock.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
spinlock.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
spinlock.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
spinp 0 → 100755
View file @ a4c94803
This diff is collapsed.
stat.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
stressfs.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
string.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
swtch.S 0 → 100644
View file @ a4c94803
This diff is collapsed.
syscall.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
syscall.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
sysfile.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
sysproc.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
toc.ftr 0 → 100644
View file @ a4c94803
This diff is collapsed.
toc.hdr 0 → 100644
View file @ a4c94803
This diff is collapsed.
trap.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
trapasm.S 0 → 100644
View file @ a4c94803
This diff is collapsed.
traps.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
types.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
uart.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
ulib.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
umalloc.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
user.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
usertests.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
usys.S 0 → 100644
View file @ a4c94803
This diff is collapsed.
vectors.pl 0 → 100755
View file @ a4c94803
This diff is collapsed.
vm.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
wc.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
x86.h 0 → 100644
View file @ a4c94803
This diff is collapsed.
zombie.c 0 → 100644
View file @ a4c94803
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment